STYLPRO Wavelength LED Face Mask

Directions

HOW TO ASSEMBLE:

1.Remove all parts of the LED Face Mask from the packaging. This includes the remote, eye comfort pads, black straps, and LED Face Mask.

2.Place the eye comfort pads into the eye holes and ensure they are securely attached. See ‘R' for right and ‘L' for left on the eye comfort pads.

3.Attach the straps into the loops at the side of the LED Face Mask. Ensure the larger end of the strap is facing upward and secure to the crown of your head.

4.Plug the wire attached to the LED Face Mask in to the top of the remote. The LED Face Mask will not work if the remote is not plugged into the mask.


CHARGING:

Insert the USB-C cable (provided) into the port at the top of the remote. Attach to a USB-C friendly power source. The battery icon will show a loading sequence when charging.

If the controller fails to charge or turn on, a reset is required. Press and hold both buttons for 20 seconds and then immediately begin charging the device, the battery icon should appear. Repeat if unsuccessful.


HOW TO USE:

1.Once your LED Face Mask is fully assembled, place the LED Face Mask onto your face and securely attach the straps around the crown of your head.

2.Long press the On/Off button on the remote. This will turn on to the ‘Anti-ageing' mode.

3.Short press the Mode button to switch to the ‘Target' mode.

4.Short press the Mode button to switch to the ‘Recovery' mode.

5.Short press the Mode button to switch to the ‘Balance' mode.

6.Once you have chosen your preferred Mode, enjoy a 10 minute session.

7.To turn off your LED Face Mask before you have completed your 10 minute session, long press the On/Off button.


CLEANING:

1.Wipe down the area of the mask that has come into contact with the skin with a disinfectant wipe after every use.


MODES:

Mode 1: Anti-ageing

The Anti-ageing mode has red LED light with a wavelength of 633nm and near-infrared light with a wavelength of 830nm. This mode provides a rejuvenating and revitalizing experience for your skin. Red LED light can help to stimulate collagen production, a protein responsible for younger looking skin.

Mode 2: Target

The Target mode has blue LED light with a wavelength of 415nm and near-infrared with a wavelength of 830nm. Blue LED light helps target acne causing bacteria that live on the skin. Near-infrared light can reduce inflammation of inflammatory acne.

Mode 3: Recovery

The Recovery mode has near-infrared with a wavelength of 830nm. Infrared can help reduce inflammation and boost overall skin health.

Mode 4: Balance

The Balance mode is a combination of red LED light with a wavelength of 633nm, blue LED light with a wavelength of 415nm and near-infrared with a wavelength of 830nm. This mode can help to reduce inflammation, to stimulate collagen production and is the perfect mode for an overall boost for the skin. This mode has the highest amount of light energy of all 4 modes. This mode addresses multiple concerns with a balanced approach; however, if you desire specific results or have severe skin issues, utilise modes 1, 2 & 3.

Ingredients

•1 x STYLPRO Wavelength LED Face Mask

•1 x USB-C Cable

•2 x Silicone Eye Comfort Pads

•2 x Adjustable Mask Straps